Account benötigt  //  Passwort vergessen anmelden
 
AltRider: Venture On
Selecting your region helps us provide you the correct information for language, orders, and shipping information.

Back
Thanks! Would you like us to remember your selection for future visits?

Yes     No        
Select Your Region

USA / Global    Europe   

anmelden  //  Einen Account anlegen
EnglishEnglish GermanGerman SpanishSpanish ItalyItaly
shipping-promo
cart IHR WARENKORB
LEER
cart
Your cart is currently at $0.00 Get free shipping by adding additional items to reach $149.00 Restrictions apply*
Verfügbare Bikes


Kategorie




ROX 2" Pivoting Risers for BMW R1200GS Watercooled (2013-current)

New Rox 2 inch pivoting risers for the new R1200GS Liquid Cooled bikes that come with the larger diameter 1 1/4 inch handlebars. These risers will NOT work on the older R1200GS’. The risers come with caps to replace your OEM clamping caps. Click on the thumbnails to the side for more info. We had to use our own caps to clamp the risers because the OEM caps are too tall. We wanted to make sure all stock cables and brake lines could be used with these risers. Making this riser a 2 inch rise and supplying our own replacement caps was the best way to do that. Anodized Clear. Always check and confirm that your vehicle has adequate cable and brake line length before installing any handlebar risers.

  • Fits 2013 and newer models, including 2017 Rallye
  • Fits 2019 R1250 GS/GSA
  • Most installations require the control cables to be moved to the outside of the fork tubes for best fitment
  • Each fork tube can be lowered by hand by loosening the single top nut (under plastic cap)
13452.product_main


BILDER ANKLICKEN UM ZU VERGRÖSSERN
Additional-photos-1438
 - Feature
 - Additional Photos

ROX 2" Pivoting Risers for BMW R1200GS Watercooled (2013-current)


Overall Customer Rating


Bewertungen

1 weiterzählen...

  • Fri 07 Aug, 2015
    by

    Works Well on a 2014 GSAW

    I have been thinking about buying a pair of these Rox pivots for a while now. I just picked these up at a discount at the 2015 MOA rally in Billings. I installed them at the Alt Rider booth using their tools. Truly a basic easy install. I tried using the OEM top clamps but just didn't seem to align up.It was suggested to lower the fork tubes to move both cable sets out around the tubes. Tried that but it did not work for my bike going all left or right on handlebars was crimping my brake cable. Re-routed cables back to OEM placement between the fork tubes. When handlebars are fully turned rack to rack it seems there is a slight pull on the cables. Hopefully no issues will arise from this. The 2" rise seems a little too much for me but time will tell.The pivot factor adds another adjustment level but with the already stretched out brake and clutch cables there truly is just a small amount of adjustment that will work for me. I am 5'11" 180lbs with a 42" jacket size. I hope this helps with your decisions.


Dieses Produkt bewerten

Sie müssen anmelden um dieses Produkt zu bewerten.
verwandte Artikel...
MotoPressor Pocket Pump $40.00
Keep your tires inflated
VERFÜGBARKEIT: In Stock
Versand: TODAY if ordered before 2pm PST (excluding weekends and holidays)
PREIS: $124.95
PART #: RO02-1-2012


Zum Warenkorb
Fragen?

Schreiben Sie uns ein eMail wegen dieses Teils
+1 206-922-3618
8am - 6pm PST

teilen
eMail-Link
Druckversion

Share

Your Item Was Added To Cart



CHECKOUTLock


Weiter einkaufen

Select Attribute First

Arrow
Close