Non pivoting riser designed to rest on your original supporting handlebar clamps and re-use your original cap. Longer bolts provided. Raises your 7/8" bars 1-1/4" center to center. Installs on XR650, XRL650, DR-Z400, DR650 and others with OEM HEX HEAD, 8mm bolts. Keep in mind that your bars will typically come back towards you at the same rate as your fork tube angle. If you are looking to raise your bars straight up consider the Pro-Offset or Pivoting Riser options. Always check and confirm that your bike has adequate cable and brakeline length before installing any handlebar risers.
Print Friendly Version