These risers were specifically designed for the 2013 and newer BMW R1200GS Liquid Cooled bikes that come with 1.25 inch handlebars. These risers will NOT work on the older R1200GS. The risers come with caps to replace your OEM clamping caps. Anodized Clear.
Anti-Vibe Risers reduce bar vibration and also pivot Forward/Backward depending on rider preference. Note: These risers aren’t designed to be positioned straight up because it can be difficult to access the BMW bolts to tighten the stem of the riser in place. For riders looking to go directly up from where the bar is currently we recommend our fixed position risers instead.
These bar risers are designed to use your stock BMW Caps on the top of the risers, as shown in the picture to the right. These risers come with replacement caps that will be used to tighten the stem of the riser to the OEM triple clamp.
- 2 inches of Rise
- 1 1/4 inch Stem
- Accepts 1 1/4 inch Handlebar
- Lifetime Warranty
- Made in the USA
- Works with Stock Cables - see our cable rerouting instructions
- Patented by the US Patent and Trademark Office under US Patent #6,920,806
- 1R-AV2GSA
Print Friendly Version